Construction services in Bakersfield

Six trades under one licensed B general contractor. Here's what each one covers, what's included and where the extra costs usually hide, so you know what you're asking for before we even show up.

Remodeled bathroom with a walk-in glass shower and freestanding tub

Residential construction

Most of our residential jobs start with a room that stopped working years ago. The kitchen with one outlet on the counter, the hall bath with the cracked tub. We tear it out, rebuild it and hand it back finished with the permit signed off.

What's included

  • Kitchen remodels. Cabinets, counters, layout changes, lighting and appliance hookups.
  • Bathroom remodels. Tile showers, tub to shower conversions, vanities and exhaust fans that actually clear the steam.
  • Room additions. Framed, roofed and tied into your existing house so it doesn't look tacked on.
  • Whole-home renovations. Done in phases if you're still living there.
  • ADUs. Detached units, attached units and garage conversions, from the site check to final inspection.
Good to know

Some jobs need stamped drawings from an architect or engineer, especially additions and ADUs. We'll tell you at the estimate if yours does. Appliances and fixtures you pick out are priced separately from the build.

Restaurant buildout with a curved bar, wood ceiling and booth seating

Commercial construction

Commercial work runs on a lease date. Rent starts whether the space is ready or not, so we build the schedule backward from your opening day and tell you the moment something threatens it.

What's included

  • Tenant improvements. Demo, framing, ceilings and finishes built to your layout.
  • Office buildouts. Private offices, conference rooms, break rooms and reception.
  • Retail spaces. Display walls, fitting rooms, checkout counters and lighting that sells the product.
  • Restaurants. Dining rooms, bars and back-of-house finishes.
  • Medical and dental suites. Exam rooms, treatment rooms and front desks.
Good to know

Kitchen hoods, fire sprinklers and other specialty systems go to specialty licensed trades. Your landlord's work letter also decides what's on you and what's on them, so bring it to the walkthrough if you have it.

New air conditioning condenser on a gravel pad beside a home

HVAC

Bakersfield summers don't leave room for a weak AC. We size the system to the house or suite instead of guessing off square footage, then install it, repair it and keep it running.

What's included

  • New installs and replacements. Split systems and package units for homes and commercial spaces.
  • Repairs. Units that won't cool, short-cycle, ice up or trip the breaker.
  • Maintenance. Seasonal tune-ups so the first 105 degree day isn't when you find out.
  • Ductwork. New and rerouted runs as part of remodels and additions.
Good to know

Brand and efficiency rating swing the price a lot, so your estimate lists the exact equipment instead of a range. If the electrical panel can't handle the new unit, that upgrade is quoted separately.

Dining room with new pendant and recessed lighting

Electrical

A lot of Bakersfield houses weren't wired for an EV charger, an induction range and a window unit in every bedroom. We upgrade the panel, run what the house needs and get it inspected.

What's included

  • Panel upgrades. Replacements and capacity upgrades for older or overloaded panels.
  • Dedicated circuits. EV chargers, kitchen appliances, shops and HVAC equipment.
  • Lighting. Recessed, pendant, under-cabinet and exterior fixtures.
  • Wiring and rewiring. New outlets and runs during remodels, plus code corrections flagged on inspections.
Good to know

If a panel upgrade needs a bigger service from the utility, PG&E's schedule sets that part of the timeline, not ours. We handle the paperwork and keep you posted while we wait.

Great room with new wide-plank wood flooring and a stone fireplace

Flooring and interior finishes

Finish work is what you look at every day, so it's where sloppy shows. Floors that lie flat, tile lines that stay straight across the room and paint that stops exactly where it should.

What's included

  • Hardwood, luxury vinyl and laminate. Removal of the old floor and install of the new one.
  • Tile. Floors, backsplashes and shower walls.
  • Epoxy floors. Garages, shops and commercial back rooms.
  • Interior painting. Walls, ceilings, trim and cabinets.
  • Trim, doors and windows. Baseboards, casing, interior doors and window replacements.
Good to know

Subfloor damage only shows up once the old floor comes up. If we find rot or a soft spot, we stop, show you and quote the repair before touching it.

Welder joining structural steel in a fabrication shop

Welding

Our welding side covers two kinds of steel: the kind that holds a building up and the kind people actually look at, like a driveway gate that finally swings without dragging.

What's included

  • Structural welding. Beams, posts, supports and connections.
  • Custom fabrication. Brackets, frames and one-off parts built to your measurements.
  • Repairs and modifications. Cracked welds, bent frames and equipment that needs reworking.
  • Gates, railings and metalwork. Driveway gates, stair and porch railings and decorative pieces.
Good to know

Structural steel tied to a building permit usually needs an engineer's drawings. If you don't have them yet, we'll tell you what the inspector will ask for.

And the work in between

Most projects need more than one trade. These usually come along as part of a bigger job, so you're not hiring a separate crew for each one.

  • Framing
  • Drywall
  • Roofing
  • Concrete
  • Stucco
  • Structural repairs
  • Demolition

Services questions

Can one project include several of these services?

Yes, and most do. A kitchen remodel often needs new circuits, new lighting and new flooring. It all goes on one estimate and one schedule, with one person you call about it.

Will I have to move out during a remodel?

Usually not for a single kitchen or bathroom. Whole-home renovations sometimes run in phases so you can stay. We'll talk through what living there during the work actually looks like at the estimate.

Can you work while my business stays open?

Sometimes. It depends on the layout and what the work involves. When it's possible, we phase the job so part of the space keeps running, and we'll be straight with you when it isn't.

Can I buy my own materials or fixtures?

Usually, yes. Tell us what you're planning before you order so we can confirm it fits the space and meets code. Any warranty on the product itself comes from the manufacturer.

What should I have ready before the estimate?

A rough budget, the timeline you're hoping for and photos of anything you like. Plans or measurements help if you have them, but we'll take our own either way.